trochoid gear pump

用法例句

On the basis of above, the pressure of cycloid gear pump for electric fuel pump for EFP431 type has been di.

在此基础上，根据啮合原理，对EFP431型电动燃油泵的摆线齿轮泵的受力进行了详细的分析，并导出了摆线齿轮泵的强度计算公式，为优化模型的强度约束条件奠定了理论基础。

In the industrial equipment,Internal meshing cycloid gear pump with its compact structure,small size,light weight,self-absorption properties,no sensitive to pollution,reliable operation,long life,easy maintenance and low cost has been widely used.

在工业设备中,内啮合摆线齿轮泵以其结构紧凑、体积小、重量轻、自吸性能好、对污染不敏感、工作可靠、寿命长、便于维修、成本低等优点得到了广泛的应用。

Calculation of cycloid gear and numerical control machining;

摆线齿轮计算及数控加工

Finite element analysis on the multi-teeth differenced cycloid gear based on ANSYS

基于ANSYS的多齿差摆线齿轮有限元分析

Compared with the involute planetary gear reducer, the cycloid gear reducer has the same transmission ratio, the number of gear teeth and the similar mechanic properties in use.

根据使用效果等效原则 ,根据摆线齿轮的齿高平均圆直径和当量模数为线索查取渐开线齿轮公差 ,是获得摆线齿轮公差的一种简捷方

The Design of Cycloidal Gear of Polar Coordinates Radial Measuring Technology

摆线齿轮极坐标径向测量技术的研究

Through comparing and analyzing the profile of involute gear with cycloidal gear, a new design scheme of cycloidal gear profile is put forward, in which the profiles both of the right and left face of the gear are designed as the theoretical cycloid curve.

通过对渐开线齿轮与摆线齿轮的齿形进行对比分析 ,提出一种新的摆线齿轮齿形设计方案 :将摆线齿轮左、右齿面的设计齿形取为理论摆线齿形 ,同时使摆线齿轮具有所需的齿厚减薄量。

This paper uses the finite element method and use it to discuss the stress and the strain of a pair of cycloidal gear.

本文运用有限元法，对摆线齿轮在啮合过程中所受的应力、应变进行了分析；给出了载荷在不同位置时，轮齿的变形图和轮齿弯曲应力变化曲线；分析了轮齿的弯曲强度。

Study on the Theory and Simulation of Cycloidal Pump;

内啮合摆线齿轮泵的理论研究与仿真

Research on Designing System of Internal Meshing Cycloidal Pump on Network;

基于网络的内啮合摆线齿轮泵设计系统研究

Study on the Mesh Characteristic of a Cycloidal Gear Pump

一种摆线类齿轮泵转子齿廓的啮合特性研究

Study on the Meshing Theory, Design and Manufacturing of External Cycloidal Type Gear Pump;

外啮合摆线类齿轮泵啮合理论及设计制造研究

cycloidal gear reducing motor

摆线齿轮减速电动机

cycloid gear hydraulic motor

摆线齿轮油液压马达

cycloidal planetary gear speed reducer

摆线式行星齿轮减速机

general epicycloid circular arc spur gear

普通外摆线圆弧直齿轮

The Optimum Design and Processing Technology Analysis of Internal Gearing Cycloidal Gear Pump;

内啮合摆线转子齿轮泵的优化设计及加工工艺分析

Foundational Process Technology Research on Milling Klingelnberg Cycloid Sprial Bevel Gear

Klingelnberg摆线齿锥齿轮加工技术基础研究

Finite element analysis on the multi-teeth differenced cycloid gear based on ANSYS

基于ANSYS的多齿差摆线齿轮有限元分析

New check methods in the manufacturing of spiral bevel gears

摆线齿锥齿轮加工中相关检验新方法

Tooth Form Emulation and Tooth Contact Analyse of Klingelnberg Cyclo-Palloid Spiral Bevel Gear;

克林贝格摆线齿锥齿轮的齿形仿真和接触分析

Study on Cycloidal Gear of Polar Coordinates Radial Tracking Measurement Technology

摆线齿轮极坐标跟踪测量技术的研究

The Design of Cycloidal Gear of Polar Coordinates Radial Measuring Technology

摆线齿轮极坐标径向测量技术的研究

The Total Efficiency Optimization of Profile Modification of Cycloidal Gear

摆线轮齿廓修形量的总效率优化设计

Parametric Design of Cycloidal Gears Based on UG/OPEN API

基于UG/OPEN API的摆线齿轮参数化设计

Study on the CAD/CAE Integrated Technology of Involute Gear in Pump;

泵用渐开线齿轮CAD/CAE集成技术研究