toothed scrapers

中文翻译有齿刮刀

同义词释义

    1)toothed scrapers,有齿刮刀2)notched scraper,齿形刮刀3)toothed curet,有齿刮匙4)hard scraping shaper cutters,硬齿面刮削插齿刀5)cross-bladed chisel bit,十字刮刀楔形齿钻头6)Scraper,刮刀

用法例句

    The rheology behaviour of sol in the scraper smearing is analysed with computer.

    运用计算机对刮刀涂覆过程中的溶胶流变行为进行计算分析,说明了刮刀与布基之间的溶胶流动速度及压力分布情况和分离力与刀位、布基移动速度等工艺因素相互关系,对刮刀涂覆成型工艺的调试有指导意义。

    This Paper analyses the scraping principle and mechanical charater for the centrifugal scraper of an ice cream freezer, deduces theoretical formula of the minmal rotation speed meeting contact scraper of agitator.

    本文对冰淇淋凝冻机中离心式浮动刮刀的刮削机理及力学特性进行了分析,推导出搅拌器满足接触式刮削的最小转速的理论公式。

    In the paper,the working principles of the cutting tools are analyzed,the wearing of the cutting tools during the shield boring is investigated,analysis and study are made on the features of and causes for the wearing of the disc cutters and scrapers,the reasons for the wearing are summarized and some recommendations are made.

    在对刀具切削原理的分析和盾构掘进中的刀具磨损情况进行了现场调查的基础上,对滚刀和刮刀的磨损特点及原因进行了分析和研究,指出了磨损的主要原因,最后提出了合理的建议和意见。

    Study on Profiling Method and Tools of Hard Scraping Shaper Cutters;

    硬齿面刮削插齿刀构形方法与刀具的研究

    Analysis of Geometric Angle of Cutting Edge of New Profiling Carbide Shaper Cutter

    新构形硬质合金插齿刀切削刃几何角度分析

    The Optimized Design and Reshaping of Profile of Skiving Cutter with Plane Flank for Gleason Gear;

    弧齿锥齿轮尖齿刮削刀盘的齿形优化设计与重磨

    Analysis on Working Angle of Scraping Cutter for Bevel Gear with Circular Arc Teeth

    弧齿锥齿轮刮削刀盘工作角度的分析(上)

    The Research on New Method of Ship Cutter Emulation of Convex Rake Face and Shaping Experiment;

    新构形插齿刀凸曲前刀面仿真与插齿试验研究

    The Solid Modeling and Finite Element Analysis of Carbide Gear Shaper Cutter with Convex Rake Face;

    凸曲前刀面硬质合金插齿刀实体建模及其有限元分析

    small module taper shafted straight tooth slotting cutter

    小模数锥柄插齿直齿刀

    cross-bladed chisel bit

    十字刮刀楔形齿钻头

    carbide face-milling cutter with indexable insert for fine tooth

    硬质合金可转位密齿面铣刀

    carbide shell face milling cutter with spiral teeth

    螺旋齿套式硬质合金平面铣刀

    spread-blade bevel gear cutter

    螺旋伞齿轮切削刀盘

    Abstract: This artical presents the principle and equipment for slotting large modulus gear with helical teeth and herringbone gear with narrow slot cutter groove.

    文摘:介绍了在大型普通滚齿机上插削大模数斜齿轮和小空刀槽人字齿轮的原理与装置。

    involute spline gear shaper cutter

    渐开线花键孔插齿刀

    Along with the extensive application of carbide cotters, the study of carbide gear shaper cotters has been subjected to more and more attention in gear manufacturing industry.

    随著硬质合金刀具的广泛应用,硬质合金插齿刀的研究越来越受到齿轮制造业的重视。

    The Calculating Method of Changing the Standard Slotting Tool into Special Slotting Tool;

    标准插齿刀改磨为专用插齿刀的近似计算

    Developing NC Grinding Program for Multi-step Side Cutter with Staggered Tooth;

    台阶错齿三面刃铣刀数控磨削研制与实践

    carbide-tipped gear hob

    硬质合金镶片齿轮滚刀

    carbide zerol gear cutter

    硬质合金弧齿锥齿轮铣刀