thinwalled casting

用法例句

Counter-gravity casting(CGC) is an effective method to shape complicated thin-wall castings of good-quality.

介绍了自行研制的大型分体式反重力铸造设备,该设备有效地解决了生产超大、超重大型复杂薄壁铸件时存在的问题,其控制系统具有较高的控制精度和可靠性。

Meanwhile,complicated and thin-wall castings in which the thinnest wall is under 1mm are produced.

采用Delphi语言开发了VCPC-1真空差压铸造智能控制的可视化界面,界面以视窗形式弹出,实现了下位机的近程控制和上位机的远程控制;并生产了最小壁厚1mm以下的复杂薄壁铸件。

The study indicated effect extent of four main technology parameter on filling ability of thin-walled castings was rising pressure time, crystal pressure, degree of vacuum, filling pressure in turn.

研究结果表明,这些参数对薄壁铸件充型能力影响程度的大小依次为升压时间、结晶压力、真空度、充型压力。

Through technological design and strict process discipline,the 1mm thin-walled castings were produced by investment casting successfully.

通过工艺设计和严格工艺纪律,实现了1mm厚薄壁铸件的熔模铸造生产,既提高了企业的效益,也为熔模铸造生产薄壁铸件提供了工艺参考。

In this paper, the basic conocept and characteristics of thin-walled castings are introduced.

介绍了薄壁铸件的概念和基本特征。

One of main reasons to result in casting hot tears is poor yieldability of the mold(core),particularly when thin wall steel castings are produced by a no bake resin sand,the problem is more serious.

热裂产生的主要原因之一就是型 (芯 )砂容让性差 ,尤其是用自硬树脂砂生产薄壁铸钢件时 ,这个问题显得特别突出。

On the basis of physical and chemical process of interface of Titanium/Zirconia ceramics, mechanics of curdle of Zirconia collosol and desiccation of silica sol binder, Zirconia-containing surface coating materials were optimized through experiment, Zirconia shell manufacturing process was developed to produce high quality thin-wall Titanium castings.

型壳中的锆、氧等元素的热扩散而产生了钛铸件的表面污染层,其厚度一般为20-200μm;采用ZrO_2、ZrO_2(CaO)、和ZrO_2(Y_2O_3)面层材料,铸件的反应层厚度依次为2001μm、100μm、50μm,由于氧化钇的加入,降低了氧化锆分解速度及Zr的活性,相应其面层材料稳定性最好,铸件污染层最薄,只有50μm,适合我公司生产薄壁钛铸件面层材料。

APPLICATION OF HIGH STRENGTH CAST IRON TO THIN-WALLED CASTING

高强度铸铁在薄壁铸件铸造中的运用

Design method of the vacuum die-casting mould for large-scale thin shell part

大型薄壁件真空压铸模具的设计方法

Study on Dimensional Accuracy of High Strength Gray Iron Cylinder Block Castings with Thin Section Thickness

高强度薄壁灰铸铁缸体铸件尺寸精度研究

Study on Precision Electroforming Technology of Complex Thin-walled Parts;

精密电铸法制造复杂薄壁零件的工艺研究

Investigation on the Die-Casting Processes of the Thin-Wall Components and Relative Metallograph Problems;

镁合金薄壁件压铸制程及相关金属学问题研究

Practice and Research of Box Section Shape and Thin Wall Steel Castings with Furan Resin Sand;

呋喃树脂砂生产薄壁箱体铸钢件的实践与研究

A New Type of Enthalpy Coating and Its Application in Thin-Wall Casting Process;

新型焓变涂料及其在薄壁件铸造技术中的应用

Process of Thin-wall Casting of High Alloy Steel by Lost Foam Casting

高合金钢薄壁件的消失模铸造工艺研究

Process and Theory of Vacuum Counter-pressure Casting Thin-wall Aluminum Alloy Castings Based on Intelligent Control;

智能控制的薄壁铝合金铸件真空差压铸造工艺与理论

A Study for Application of Low Pressure Casting Technology in Large Thin Wall Aircraft Casts of Aluminum Alloys;

低压铸造在大型薄壁航空铝合金铸件上的应用研究

Study on Adjusted Pressure Casting Process with Electromagnetic and Vacuum for Aluminum Alloy Casting of Complicated & Thin-wall Components

复杂薄壁铝合金铸件磁动力真空调压铸造工艺研究

Numerical Simulation and Optimization for Counter-pressure Casting Process of Large-scale Thin-wall Al Alloy Cylindrical Casting

大型薄壁铝合金筒体铸件差压铸造过程数值模拟与工艺优化

This article introduces a kind of equipment, which removes the adhering sand between the thin walls and in the furrows of cast iron parts without damages.

本文介绍了一种无损伤清除铸铁件薄壁间、沟槽内粘砂的设备。

Reasons and Measurement for Main Defects of Large Size Castings with Thin Wall Thickness Molding with Furan Self-Cured Resin Sand;

呋喃自硬砂生产大型薄壁铸钢件主要缺陷成因及解决措施

Counter-pressure Casting Process Design of Large Thin-wall Al Alloys Cylindrical Casting Based on Numerical Simulation

基于数值模拟的大型薄壁铝合金件差压铸造工艺设计

Improving Filling Ability of Thin-Walled Aluminum Piece by Traveling Magnetic Field Foundry Method

移动磁场铸造法改善铝薄壁件充型能力的试验研究

Study on Thin-Wall and Low-Roughness Ceramic Shell Mould Based on EPS Process

薄壁光整消失模壳型铸造的型壳研究

restrained torsion of thin walled bar

薄壁杆件的约束扭转