temper rolled sheet

用法例句

Experimental study of recrystallization of cold-rolled sheets produced by CSP hot bands;

CSP冷轧薄板再结晶试验研究

The main production process,equipments collocation and advanced technologies of the primary cold-rolled sheet project are introduced in this paper.

介绍了莱钢冷轧薄板(一期)工程的主要生产工艺、设备配置及先进技术。

Newly-built cold-rolled sheet project in Jigang is introduced and the process flows, technological characteristics and the technical parameters of main facilities in 110×104 tons continuous pickling line, 84×104 tons cold rolling line, 43×104 tons annealing line, 48×104 tons leveling line and 33×104 tons recoiling and cutting line are analyzed with emphasis.

介绍了济钢新建冷轧薄板项目的情况,重点介绍了110万t连续酸洗线、84万t冷轧线、43万t退火线、48万t平整线和33万t重卷分卷线的工艺流程、技术特点及主要设备技术参数。

A cold-rolled strip plate-profile recognition method was presented to improve the detection accuracy based on image morphology processing method.

为了解决冷轧薄板板形识别问题,采用基于形态学的图像处理方法。

A cold-rolled strip plate-profile recognition method was presented to improve the detection accuracy based on image processing.

为了解决冷轧薄板板形识别问题,采用基于图像处理的方法,对图像进行直方图均衡化,使处理后的图像对比度、图像边界的清晰度有了很大的提高,并在此基础上再进行形态学增强,改善图像效果。

To make high desulphurization rate of steels in ladle furnace refining for cold rolled sheets,w([O]) has to be decreased to a very low level,which easily results in w() out off the specification range of the steels.

炉外精炼过程钢液氧含量对脱硫效率影响显著,对冷轧薄板钢种如在LF中进行深度脱硫,由于必须将钢液氧含量降至很低水平,容易造成钢中硅含量超标等问题。

Loop analysis of continuous pickling line for cold rolled sheet of Tangshan Iron and Steel Co., Ltd.;

冷轧薄板连续酸洗线的活套分析

Technology characteristics of cold rolled sheet unit of Benxi Steel Posco Cold Rolled Co.,Ltd.;

本钢浦项冷轧薄板机组的工艺特点

cold-rolled drawing quality sheet

冲压用优质冷轧薄板

Study on Control of Flatness and Surface Roughness on Cold Strip Rolling Mill;

冷轧薄板板形与表面粗糙度控制研究

Magnetic iron cold-rolled sheets

GB/T6985-1986电磁纯铁冷轧薄板

Cold-Rolled heat-Resisting superalloy sheets

GB/T14996-1994高温合金冷轧薄板

Study on Microstructure and Performance of CSP-Low Carbon Cold-rolled Sheet;

CSP-低碳冷轧薄板组织与性能的研究

Finite Element Research of Working Roll for Cold Rolling Thin Steel Plate Based on ABAQUS

基于ABAQUS冷轧薄板工作辊有限元研究

Design Characteristics of Continuous Annealing Line for Cold-rolled Steel Sheet of Maanshan Iron & Steel Co.,Ltd

马钢2130mm冷轧薄板连续退火线设计特点

A Brief Introduction to the Compiling of Acid Rolling Plan Regarding MES System Applied in Tangshan Iron and Steel Group Strip Cold Rolling Plant

简析唐钢冷轧薄板厂MES系统酸轧计划的编制

Cold rolled low-carbon steel sheet--Ferrite grain size--Test methods

GB/T4335-1984低碳钢冷轧薄板铁素体晶粒度测定法

Research and Application of Production Planning and Scheduling System of Cold-rolling Process;

冷轧薄板生产计划与调度系统的研究与应用

Research on Evolution of Tissue and Microstructure of Cold Rolling Steel Sheet Based on the CSP Process;

CSP工艺下冷轧薄板组织、微观取向的研究

The Design and Implementation of the Order Planning Methed for Cold-Rolling Enterprise;

冷轧薄板类企业合同计划方法的设计与实现

My Cold-rolled Sheet Market Demand and the Competitiveness of Enterprises Study;

我国冷轧薄板市场需求与企业竞争力研究

The Study and Actualize on MES of Chongqing Iron & Steel Company Limited the Cold Rolled Strip Mill;

重钢冷轧薄板厂制造执行系统的研究及实现

Research on Evolution of Microstructure and Microorientation of Cold Rolling Steel Based on the ASP Process

鞍钢ASP工艺冷轧薄板组织、微观取向研究

The automation control system in Horizontal Furnace of No.2 Continuous Hot Galvanizing Line of TangSteel Strip Cold Rolling Plant

唐钢冷轧薄板厂2#镀锌卧式炉的自动控制系统

Research and Analysis for the Mechanism of the Mainstream Mash Seam Welder and Laser Welder for Cold Roll Mill

主流冷轧薄板工厂焊机机械结构研究与分析

Application of PLC in the Control System of Acid Pickling Line

浅谈唐钢冷轧薄板厂酸洗生产线PLC控制系统