rim hole location

中文翻译气门嘴孔的位置

同义词释义

    1)rim hole location,气门嘴孔的位置2)valve hole,气门嘴孔3)TP Throttle Position,节气门位置4)Ventilation hole position,通气孔位置5)position of holes,孔的位置度6)valve,气门嘴

用法例句

    Formulation of valve compound for tubeless tire;

    无内胎气门嘴胶料配方探讨

    tyre valve hole misalignment

    轮胎气门嘴孔位置不正

    cutting machine for rubber inner tube valve holes

    橡胶内胎气门嘴孔挖孔机

    Tyre valve threads

    GB9765-1997轮胎气门嘴螺纹

    Breathe in through the right nostril three times, and exhale through the mouth. Repeat with left nostril, exhale through the right.

    以右鼻孔吸气三次,以嘴呼气。换左鼻孔重复,以右鼻孔呼气。

    Clean each injector bore at intake manifol

    清洁进气歧管上每个喷嘴孔。

    Test method for tyre valve

    GB/T9766-1994轮胎气门嘴试验方法

    HPb63-0.1 leaded brass tube for air valve mouth applications

    GB/T8010-1987气门嘴用HPb63-0.1铅黄铜管

    Tyre valves--Terms and definitions

    GB/T12839-1997轮胎气门嘴术语及其定义

    CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle

    K系数喷油嘴喷孔内气液两相流动的三维模拟

    diameter and number of hole

    喷嘴量孔孔径及数目

    There are two ports in the valve of an engine.

    一台发动机的阀门上有两个通气孔。

    Process Technology Research on Valve Seat Ring and Valve Stem Guide Hole of Cylinder Head;

    气缸盖气门座圈和导管孔的加工工艺研究

    Research on Image Automatic Identification Technology to Valve Small End-face Pore Disfigurement;

    气门小端面气孔缺陷图像自动识别技术的研究

    Blue veins stand out in his neck, and there is a murderous look on his face with its raised eyebrows and downward curling lips.

    青筋露起的脖颈,满面杀气的面孔,眉目上挑,嘴角下撇,

    Effect of Nozzle Diameters on the Distribution of Bubbles and Mass Transfer in Bubble Columns;

    喷嘴孔径对鼓泡床内气泡分散和质量传递的影响

    The buzzing of the overheated boiler was heard, and the steam was escaping from the valves.

    机车锅炉早已烧热,正在不停地呜咽着,蒸气从气门嘴上直在外喷。

    Study on Uncovering Low Permeable Coal Seam Through Cross Cut by Deep-hole Blasting Technology to Increase Permeability of Coal Seam;

    石门揭穿低透气性煤层深孔爆破增透技术研究

    Inflate the Therm-a-Rest mattress by mouth as hard as possible, then quickly close the valve.

    用嘴吹气垫使之尽可能膨胀到最坚硬,然后立即关闭阀门.