rendered fat

用法例句

A assay method of immobilized resin was set up by testing the particle size and strength of resin, immobilizing, and testing stabilization of the immobilized enzyme, and some problems of resin in application in recent three years' resin screening work were summarized.

从树脂粒度、树脂强度、固定化、稳定性检测方面着手,建立了一套树脂评估方法并总结了树脂检测中常见的问题,希望有助于树脂生产企业加快固定化树脂的国产化进程。

This paper firstly studied the bonding mechanism of the photosensitive resin blade,and then introduced the effective measures to improve the quality for photosensitive resin blade by means of the metal-coated diamond abrasive and studied the change of bonding ability of the blade compared with conventional abrasive.

探讨了光固化树脂磨具不同于普通树脂磨具的结合机理,并在该理论的基础上寻找出改善磨具结合性能的措施。

Diamond abrasives(4～8μm girt size)are bonded quickly by photosensitive resin and then exposed under 300～500 nm wavelength ultraviolet ray to fabricate fixed abrasive plate.

采用4～8μm粒径的金刚石微粉作为磨料,以光固化树脂作为结合剂,在300～500 nm波长紫外线照射下,使光固化树脂快速固化,制作固着磨料研磨盘(金刚石浓度100%),以φ5 mm氮化硅陶瓷球为加工对象,在自行设计的实验台上进行了加工实验。

Radical, cationic and hybrid photocurable resins used for stereolithography(SL) are introduced.

介绍了用于立体光造型技术的自由基型、阳离子型及混杂型树脂体系 ,阐述了它们各自的优缺点 ,展望了立体光造型法用光固化树脂的研究前景和发展趋

A series of photocurable resins used for SL are prepared.

设计了多种用于立体光造型 (SL)法的光固化树脂配方 ,对影响其体收缩和线收缩的几种因素进行了研究 。

The principle on stereolithography,laser source,photocuring resin and photo-initiator were reviewed.

简要介绍了快速制造技术 ,阐述了光固化成型原理 ,激光光源及所用光固化树脂。

The photocuring resin for Laser Rapid Prototyping & Manufacture was prepared,the shrinkage reasons of photocuring resin was analyzed,and the effect of the photocuring resin shrinkage on parts curl distortion was studied.

制备了激光快速成型用光固化树脂 ,分析了光固化树脂收缩的原因 ,研究了光固化树脂的收缩行为对成型零件翘曲和变形的影响 ,从树脂本身微观分子结构和引起翘曲的机理方面来解释零件的变形行为 ,并且提出了从树脂和扫描工艺两个方面进行改

UV-light activator for resin polymerization

紫外线光敏树脂固化器

Non-isothermal Curing Kinetics of Phenolic Resin/Epoxy Resin Composite

热固性酚醛树脂固化环氧树脂反应动力学研究

A review of the influential factors of the curing degree of light curing composite resin

光固化复合树脂固化程度的影响因素

Preparation of Microencapsulated Curing Agent and Its Effect on Curing Behaviors of Epoxy Resin;

环氧树脂固化剂的微胶囊化及其对环氧树脂固化行为的影响

Study on curing reaction kinetics of low temperature curable BMI modified by PES

PES改性低温固化双马树脂固化动力学研究

Cure Kinetics and Cure Mechanism of New Phenolic Resin

新型酚醛树脂固化反应动力学及固化机理研究

Influence of Curing Temperature on Performance of Epoxy Thermosets

固化温度对环氧树脂固化物性能的影响

Effects of curing agents on curing characteristics of low molar ratio ureaformaldehyde resin.

固化剂对低摩尔比脲醛树脂固化特性的影响

Effects of phosphate on curing characteristics of urea-formaldehyde resins.

磷酸盐类固化剂对脲醛树脂固化特性的影响

resin-solvent-curing agent

树脂-溶剂-固化剂

ultraviolet curable resin coated fiber

紫外固化树脂涂覆光纤

Immobilization of Candida sp.lipase on resin D301

D301树脂固定化假丝酵母脂肪酶

A study on mechanism of lipase immobilized with macroporous resins

大孔树脂吸附固定化脂肪酶机理研究

Curing of Multi-Branched Polythiol and Epoxy Resin System

多支化聚硫醇与环氧树脂的固化研究

Study on the Curing Characteristics and Kinetics of Bamboo Liquefaction Phenolic Resin

竹材液化物酚醛树脂胶固化及固化动力学研究

Development of Phenolic Curing Agents Curing System Epoxy Powder Coating;

树脂酚类固化剂固化环氧粉末涂料的研制开发

STUDIES ON THE CURING ACTION OF EPOXYRESIN/BPEA -2 LATENT CURING SYSTEM;

环氧树脂/BPEA-2潜伏性固化体系固化行为的研究

testing methods for specific gravity of epoxide resins and hardeners

环氧树脂和固化剂比重试验方法