reed plate

用法例句

The 4 mm thickness of reed plate is used to make reeds for rapier machines.

通过探讨试验 4mm宽薄筘片的生产工艺 ,认为圆丝的质量对制片工艺的顺利进行至关重要 ,进而提出了对圆丝的金相组织、机械性能要求及合理的扁模结构尺寸、拉拨工艺参数配置 ,使制造更薄的筘片成为可

Discussion on an experienced equation of the displacement of the sectional warper spacing reed;

分条整经机定幅筘位移量的简易经验公式探讨

steel reed for cotton and wool loom

钢筘（棉、毛织机用）

The usual mechanism which gives the reed its motion is known as the lay.

驱动钢筘运动的机件通常称为筘座。

Reeds of super width and density for shuttleless looms

无梭织机特宽特密钢筘

The warp yarns are threaded through the spaces of the reed called dents.

经纱穿过被称为筘隙的空间。

The motion of the sley, including its period of dwell, is positively controlled.

筘座的运动(包括停顿时间)被积极控制。

Analysis of reed-base′s front extreme position for four-bar beating-up linkage

四连杆打纬机构的筘座前心位置分析

We therefore use temples to keep the cloth near the fell stretched to reed width, or as near to it as possible.

因此,使用边撑使织口处的织物扩展到穿筘宽度,或尽量接近穿筘宽度。

For example, the space required from a loom having a reed space of 130 cm may be no greater than that needed for a conventional shuttle loom of similar width.

例如一个筘幅为130厘米的剑杆织机的占地,可能不会比一台类似筘幅的常规织机占地更多。

The Sulzer sley drive uses several pairs of matched cams, spaced at intervals across the width of the sley.

苏尔寿片梭织机的筘座驱动装置使用几对共轭凸轮,共轭凸轮沿筘座的宽度方向相同排列。

When the reed comes forward again, it will stretch the cloth at the fell.

当钢筘再次向前推进时,会在织口处扩展织物。

Beat -up is accomplished by the use of wire grate called a reed.

打纬是由一个被称为钢筘的金属丝格栅完成的。

Study on Front Extreme Position of Beating-up Reed of Four-bar Beating-up Mechanism;

四连杆打纬机构打纬筘前心位置的分析与研究

Study on purification of total flavonoids from the leaves of A.trifoliatus by macroporous resin

白筘叶总黄酮的大孔树脂纯化工艺研究

Air flow field in unconventional shaped reed and its influence on weft yarn flying

筘槽内引纬气流场分布及其对纬纱飞行的影响

The mass of the reciprocating parts is small compared with that of the sley in a shuttle loom.

与有梭织机的筘座相比,苏尔寿片梭织机往复运动构件的质量较

At the beginning of the weaving cycle, the reed is moved backward to allow for filling insertion.

在织造循环开始时,钢筘向机后运动,以便于引入纬纱。

This effect would be absent if the sley dwelt during the period of shuttle flight.

如果梭子飞行期间筘座停顿,这种效果便不复存在了。

Although this mechanism is called the warp protector motion, it also protects the fabric, the reed and the shuttle.

尽管该机构被称之为护经机构,它对织物、钢筘、梭子也有保护作用。