rate of strain field

用法例句

On the flow stress behavior of AZ80 magnesium alloy compressed at high temperatures and medium/high strain rates;

中、高应变速率下AZ80镁合金高温变形力学行为研究

Effect of strain rate on flow stresses and microstructures of titanium alloy TC11 alloy;

应变速率对TC11钛合金流动应力和微观组织的影响

Influence of strain rate on mechanical behavior of TiNi shape memory alloy under compression;

应变速率对TiNi形状记忆合金压缩力学行为的影响

The flow stress feature of 7075 aluminum alloy,during high temperature plastic deformation ranging from 300~500 ℃ and strain rates of 0.

采用Gleeble-1500热模拟机对7075铝合金触变高温压缩变形过程中的变形特性进行研究,分析该合金的应变速率与流变应力之间的关系,采用线性回归法建立了流变模型。

Strain induced transformation and transformation induce plasticity(TRIP) are happened when this sort of steels are deformed at three different kinds of strain rates at a temperature between Ms and Md .

该钢以三种不同应变速率在 Ms- Md温度之间形变 ,应变诱导相变 ,相变诱发塑性 ( TRIP)。

Also,the shear strain rates of the martix and the.

借助该钢基体内具有的带状组织测量弹坑周围材料塑性切应变呈山峦起伏分布，并给出塑性变形的应变速率（１０４ｓ－１）以及ＡＳＢ形成的应变速率（１０５ｓ－１）。

Thedynamicrecoveryoftheβoccursathighstrainrates ,andthe.

结果表明 ,在Ti3Al5Mo5V合金热变形中 ,α +β相无论在高应变速率还是在低应变速率下 ,都发生了再结晶 ,且随温度升高所产生的应力急剧下降 ,流变软化明显 ,应力对温度变化敏感。

Bytestingthestress -straincurveofFe - 1 7Mn - 5Si- 1 0Cr- 5Nishapememoryalloyatdifferenttemperatures ,differentstrainratesandvariationoftemperature ,the paperhasstudiedformabilityandworkabilityofthealloy .

本文通过测试Fe -1 7Mn - 5Si- 1 0Cr - 5Ni形状记忆合金不同温度、不同应变速率和变温下的应力应变曲线 ,分析了合金的成形加工性。

Strain rate and stress are nonlinearly related.

应变速率和应力呈非线性关系。

Effect of Strain Rate on Deformation Induced Ferrite Transformation of Q235 Steel

应变速率对Q235钢形变诱导铁素体相变的影响

Influence of strain and strain rate on twin substructure of Fe-24Mn-0.5C TWIP steel

应变和应变速率对Fe-24Mn-0.5C TWIP钢亚结构的影响

Superplasticity of TA15 Titanium Alloy Induced by Strain Rate Cycling

TA15合金应变速率循环超塑性研究

Strain-rate and Temperature Sensitivity Coefficient for TC11 Titanium Alloy

TC11钛合金应变速率和温度敏感系数

Influence of Strain Rate on Grain Refinement by Plastic Deforming;

应变速率对强塑性变形晶粒细化的影响

Deformation microstructure of AZ31B magnesium alloy under high strain rate compression

高应变速率下AZ31B镁合金的压缩变形组织

Effect of Strain Rate on Deformation Behavior in α+β Phase Field of Titanium Alloy TC11

应变速率对TC11钛合金α+β相区变形行为的影响

Exploration on Using Strain Rate and Displacement Rate to Determine the Yield Strength of Metal Materials

应变速率和位移速率对测定金属材料屈服强度影响的探讨

Slow Strain Rate Test Studies of Stress Corrosion Cracking of Pipeline Steels;

管线钢应力腐蚀慢应变速率拉伸试验研究

Stress Corossion Cracking Behavior of 5083 Aluminum Alloy in SSRT

5083铝合金慢应变速率拉伸下的应力腐蚀行为

Effect of Strain Rate on Stress Corrosion Cracking Behavior of Steel API-X70

应变速率对X70管线钢应力腐蚀行为的影响

Deformation promotes the growth of ferrite grains, the growing rate of ferrite in the early stage of DEFT was calculated.

形变强化相变铁素体晶粒转变初期的长大速率随应变速率的增加而增大.

The flow stress can be described by temperature-compensated strain rate, the so-called Zener-Hollomon parameter.

3．利用7055铝合金高温塑性变形时稳态流变应力σ、应变速率(?)

Study on the Notch Sensitivity of Polymer under Different Strain Rates;

聚合物在不同应变速率下的缺口敏感性研究

Study on High Strain Rate Compression Superplasticity of Commercial AZ31 Magnesium Alloy;

工业态AZ31镁合金高应变速率压缩超塑性研究

Inner-product of Strain Rate Vector in Spherical Coordinate for Wire Drawing

线材拉拔球坐标应变速率矢量场的内积

Strain Rate Effects on Low Cycle Fatigue Performance of Superalloy IC10 in 1100 ℃

应变速率对IC10合金1100℃低周疲劳性能的影响