over etching

用法例句

The results show that if the poled direction [001] lies in the (100) indentation plane, etching in HCl+HF solution causes the average length of 16 indentation cracks to increase from (140±17)μm to (211±26)μm, i.

研究了浸蚀对极化和未极化的BaTiO3单晶中畴变和压痕裂纹扩展的影响。

IrO2-Ta2O5 oxide anode was prepared by coating oxide on titanium substrate which has been pretreated by sandblast and oxalic acid etching.

钛基体涂覆铱钽氧化物阳极制备过程中对基体喷砂并进行不同时间的草酸浸蚀。

The structure of the membrane could be controlled by changing the current density,the ratio of HCl:H2SO4,the temperature and the etching time.

在浸蚀多孔金属铝模板中制备小尺寸TiO2阵列材料。

thermal etching

热腐蚀;热浸蚀;热力学侵蚀;热蚀;热蚀法

No resolved etching was developed.

并无可溶性浸蚀发生。

The sea is gradually encroaching (on the land), ie washing the land away.

海水渐渐浸蚀了陆地.

Less common reagents that attack polymers include acids, bases.

比较不常见的浸蚀多聚物的化学浸蚀物有酸、碱。

determination of resistance to liquids:water immersion method

耐液体浸蚀的测定 -第2部分:浸液法

Therefore, the corrosion was caused by erosion of rainwater during ocean shipping .

因此，这些腐蚀是海运途中雨水的浸蚀造成的。

Stainless steels--10Percent oxalic acid etch test

GB/T4334.1-1984不锈钢10%草酸浸蚀试验方法

Your car is being constantly bombarded by contaminants each and everyday.

你的车正在每天都遭受污染物的浸蚀。

The creek had eroded deep into the little gully.

泾水把那狭窄的河床浸蚀得很厉害。

The continuous dynamics of the erosion and the transformation of the natural landscape result in an unusual environment.

恒古不停的浸蚀作用﹐形成这个稀有的地理环境。

STUDY ON PROTECTION MATERIAL FROM MOLTEN ALUMINUM THERMAL ABRASION BY ESD OF CERAMET

电火花沉积金属陶瓷材料耐铝液热浸蚀研究

Influence of acid pickling on electrodeposition of aluminum on magnesium alloy in room temperature molten salts

酸浸蚀处理对AZ91D镁合金室温熔盐镀铝的影响

An improvement of the etching technique for displaying austenite grains in hull structure plate steel

船板钢奥氏体晶粒浸蚀显示方法的改进

Combined Cyclic Corrosion Tester

盐水、干燥、加湿、浸渍复合腐蚀试验机

ANALYSIS OF CORROSION DATA OF HOT DIP GALVANIZED COATING OBTAINED IN AN ACCELERATED CORROSION TEST

热浸锌层人工加速腐蚀试验数值分析

The Influence of Ni and V on the Corrosion Resistance of Hot-dipped Galvanizing Coating

Ni和V对热浸镀锌层耐蚀性能的影响

CORROSION PROBLEM IN HOT-DIP GALVANIZING PROCESS

热浸镀锌板生产过程中的腐蚀与对策

CORROSION BEHAVIOR OF LY12 ALUMINUM ALLOY WITH CYCLIC IMMERSION CORROSION TEST

LY12铝合金在周浸试验中的腐蚀行为