oscillating feeder

用法例句

Aiming at the problems occurring during retrofit on the vibratory coal feeder in a power plant boiler\'s pulverizing system,the electronic control circuit and its DCS configuration were respectively improved and optimized,which made the coal feeder work stably,and thus the pulverized coal quality increased and coal feeder reliability raised.

针对发电厂锅炉制粉系统振动给煤机改造过程中出现的问题,对电子控制线路及DCS组态进行了改进和优化,使给煤机工作平稳可靠,从而改进了制粉品质及工作可靠性。

In view of the problem that the complementary vibration of vibrating feeder results in the excessive consumption of raw material in manufacture of FCMP, various brake modes of the brakemotor are studied, and an improved halfwave dynamic braking is adopted.

针对高炉法钙镁磷肥生产中 ,因振动给料机余振导致多给料引起原燃料消耗增加的问题 ,分析研究了振动电机的各种制动方式 ,采用改进的半波能耗制动对原电气控制回路进行了改造 ,有效地消除振动给料机的余振 ,确保了准确配料 ,使每吨钙镁磷肥焦耗降低 6 kg,对年产 2 0万 t钙镁磷肥厂 ,全年节焦 12 0 0 t,年降低成本 72万

The moving process of solid particles in a vibrating feeder is investigated by means of Discrete Element Method.

利用离散元方法对颗粒在振动给料机中的运动过程进行了数值研究。

This paper describes a method of fuzzy optimum design of inertial vibrating feeders,on the basis of analyzing vibrating characteristics of inertial vibrating feeders.

采用模糊优化设计出的振动给料机的效果最好 ,在满足工作要求的情况下 ,其传出的振动最小 ,从而使噪声大大降低。

Finite element analysis and structural improvement of the discharge chute in vibration feeder based on ANSYS

基于ANSYS的振动给料机给料槽有限元分析及结构改进

The paper introduces the vibration insulation methods, design parameter choice ofvibration feeder, and the theory of vibration in-sulation is discussed.

本文介绍了振动给料机的隔振方法和设计参数的选取,并对振动给料机的隔振理论进行了详细的分析。

Against to the vibration feeder s property of slow alteration,use the model reference adaptive control to compensate the aberration of the output vibration amplitude.

针对振动给料机数学模型的缓慢时变性,采用模型参考自适应控制对输出振幅的误差进行补偿。

Research on material combination characteristics of vibratory feeder;

振动给料机物料结合的实验研究

closed magnetic-vibrating feeder

封闭型电磁振动给料机

Design Vibration Feeder Parameters of Y800X5000

Y800X5000振动给料机参数设计

Dynamic Characteristic Analysis of Vibration Feeder Based on ANSYS

基于ANSYS的振动给料机给料槽动态特性分析

Safety code for vibration feeder

GB16490-1996振动给料机安全规范

Characteric Analysis and Simulation Control of Electormagnetic Vibration Feeder;

电磁振动给料机特性分析与仿真控制

Structural analysis of the CDQ electromagnetic vibrating feeder

干熄焦用电磁振动给料机的结构分析

Mondal analysis of two-mass vibration feeder based on ANSYS

基于ANSYS的双质体振动给料机模态分析

Optimal design based on UGNX of the vibration head of the electromagnetic vibration feeder applied to CDQ

基于UGNX的干熄焦用电磁振动给料机振动头的优化设计

Finite element analysis and structural improvement of the discharge chute in vibration feeder based on ANSYS

基于ANSYS的振动给料机给料槽有限元分析及结构改进

Research of Mechanics Model and Computer Control for Electromagnetic Vibration Feeder;

电磁振动给料机的力学模型与计算机控制的研究

By the use of the theory and method of reverse seeking engineering this paper introduced a reverse seeking process earried out on the material object of piezoelectric ceramic vibrational feeder.

本文介绍了应用反求工程的理论和方法，对压电陶瓷振动给料机进行实物反求的过程。

Through a test made on the product being seeked in reverse, it verified that the piezoelectric typed vibrational feeder prossesses remarkable superiority on noise reduction and energy saving.

通过对反求出的产品的试验，证明压电式振动给料机具有显著的降噪节能优势。

An optimization of vibrating feeding system of bridge-type grab ship unloader

桥式抓斗卸船机振动给料系统的优化

The Disquisition of Screen Vibration Feeder Failure Analysis and Improve Measures;

筛分机振动给料器失效分析及改进措施研究

Mechanism Analysis and Experimental Research of the Piezoelectric Vibration Feeder;

压电式振动给料器的机理分析与实验研究

Mechanism Analysis and Experimental Research of the Vertical-drive Type Piezo Inline Feeder;

垂直驱动式压电直线振动给料器的机理分析及实验研究

Analysis on the Vibration and Crawling Phenomenon of Servo-feed System on CNC Abrasive Water-jet Cutting Machine

数控磨料水射流切割机伺服进给系统的振动爬行现象分析

The feeding control system is designed in the mode of electromagnetic vibration.

电磁振动给料控制系统采用了电磁振动的方式。