lock chamber

用法例句

Dynamic optimization model for ship combination in lock chambers;

闸室船舶组合优化动态模型

Technical measures taken for the Zaohe 3rd lock chamber are discussed in view of the construction characteristics and thorny problems and according to the construction procedure.

针对皂河三线船闸闸室施工特点、难点,依据闸室施工工序,提出了应采取相应技术措施施工。

Resistance and allowable speed of vessels passing through the lock chamber is analyzed and also the difference between model test and practical operating conditions is analyzed.

分析了阻力、允许速度及模型试验与实际运转条件的差异 ,为确定船舶 (队 )进、出闸室 (或船厢 )的速度 ,进行了初步探讨 ,提出依据和建议。

Stability against sliding for gate chambers by principle of maximum entropy;

最大熵法计算水闸闸室抗滑稳定可靠性

The analytic model of reliability against sliding stability of gate chamber and the calculating method of the reliability under general condition are discussed.

研究了水闸室抗滑稳定可靠度分析模型，闸室稳定的一般情况下的可靠计算方法；根据ＪＣ法分析了随机变量不同分布下的闸室稳定可靠度，得到了有意义的结论。

According to Ansys program,some analyses are made about stress,strain and stability of sluice in Yutang power station,and a lot of data have been gained after the calculation of stress and strain of different parts in different operation conditions.

利用三维有限元程序,对鱼塘水电站溢洪道闸室进行稳定性、应力及应变的分析。

According to ANSYS program, some analyses are made about stress, strain and stability of sluice in Yutang power station, and a lot of data have been gained after the calculation of stress and strain of different parts in different operation conditions.

利用三维有限元程序,对鱼塘水电站溢洪道闸室进行稳定性分析、应力及应变的分析。

Discussion on the reliability of the sluice chamber structure system;

水闸闸室稳定结构体系可靠度探讨

Study and Development on the Sluice Chamber CAD System Based on ObjectARX;

基于objectARX的水闸闸室CAD系统研究与开发

lock chamber water stage recorder

闸室水位自记指示仪

compartment with an airtight door at each end,providing access to a pressurized chamber

气闸室（两端有密闭门可通往增压室）.

The Numerical Analysis of Mechanical Behavior of Sluice Structure and Foundation;

水闸闸室结构与地基力学作用机理数值分析

Energy dissipation effect and mechanism of open ditch energy dissipater in high-head lock

高水头船闸闸室明沟消能效果及机理分析

Structure Stress Analysis and Optimization for the Naji Junction Shiplock

那吉航运枢纽船闸闸室结构应力分析与优化

Study on filling and emptying system of Guiping second-line shiplock chamber wall structure

桂平二线船闸输水系统与闸室墙结构方案研究

Application of Monte-Carlo Method in Reliability Analysis against Sliding for Gate Lock Chamber

蒙特卡罗法在水闸闸室可靠度分析中的应用

Experimental Research of Discharge Coefficient of the Plat Gate in Small Opening at High Water Head

高水头闸室平板闸门小开度流量系数试验研究

Study on Flow Pattern in Ship Lock Chamber of Letan Hydropower Station and Countermeasures

乐滩水电站船闸闸室流态问题的研究与对策

Construction of Prestressed Anchorage Cable on Sluice Chamber of Zhangfeng Reservoir’s Spillway

张峰水库溢洪道闸室预应力锚索施工

Study of strength and stability for the chamber wall and the slope of the permanent lock in Three Gorges project

三峡永久船闸闸室墙及边坡的强度与稳定性研究

Dynamic Interaction between Soil and Ship Lock with Double-hinged Soleplate;

双铰底板式船闸闸室结构与土体的动力相互作用

Study on the Numerical Simulation of Deformation Mechanism of Middle Frusta and Vertical Border Wall at TGP Permanent Shiplock;

三峡永久船闸中隔墩和闸室直立边墙变形机理的数值研究

Packing Problem Research of Navigation Co-scheduling System for the Three Gorges Gezhouba Dam;

三峡—葛洲坝联合调度系统闸室编排研究

Research on the Application of Presressed Concrete on Depressed Chamber Structure;

预应力混凝土在整体式闸室结构中的应用研究

Static and Dynamic Analysis on Sluice and Optimum Design of Upper Frame;

闸室结构静动力分析及上部框架优化设计

3D Finite Element Analysis of Spillway Chamber by ANSYS;

基于ANSYS的泄洪洞出口闸室三维有限元分析