idnetification testing

用法例句

This article briefly discusses main equipment and operating conditions of Taiyuan Iron and Steel(Group) Co,Ltd from smelting to rolling of seamless pipe,as well as conventional qualification test results of TP347H seamless steel pipe including surface quality, dimension,chemical composition,metallurgical structure,grain size,non-metallic inclusion,mechanical property at room temperatu.

简述了太钢从炼钢到制管的装备和生产情况,以及对TP347H无缝钢管的表面质量、几何尺寸、化学成分、金相组织、晶粒度、非金属夹杂物、室温力学性能、晶间腐蚀试验、工艺性能等常规评定试验结果。

Reliability Qualification Test for Electronic Measuring Instruments;

电子测量仪器的可靠性鉴定试验

The requirements of qualification test of anti-ship missile are analyzed.

通过分析反舰导弹鉴定试验的指标,阐述了采用均匀设计方法制定导弹的鉴定试验方案,以及对试验结果进行分析处理的方法,介绍了在导弹作战使用范围的自控终点散布、命中精度、捕捉概率、自导命中概率和导弹的单发命中概率的计算方法。

The paper mainly describes the work how we should do on reliability qualification test for the Electronic Jamming Equipment, including the definition that experiment the parameter, experimenting the choice of the project with certain, on trial procedure with rule, experiment the section and should the infliction of the dint, the data after experimenting handles etc.

对电子干扰设备如何进行可靠性鉴定试验进行了详细的阐述,包括试验参数的定义、试验方案的选择与确定、试验的程序和规则、试验剖面及应力的施加、试验后的数据处理等内容,对其他电子设备的可靠性鉴定试验有很好的借鉴作用。

Parameter amendment is done in association with the calibration experiment.

通过建立无缝线路轨道力学模型分析温度力变化时侧向力及其作用位移的变化规律,并结合标定试验对上述规律进行了参数修正,最终实现对钢轨轴向温度力的精确测试。

Calibration test of CR-39 nuclear track detector;

CR—39核径迹探测器的标定试验

Optimizing design of engine through research on calibration testing enables the engine to have a good performance and good fuel economy.

阐述了4CT天然气发动机开发总体方案和技术参数的确定,并通过标定试验研究对发动机进行了优化设计,使该发动机获得了良好的动力性和经济性。

Stable capacity of the sensor has been verified through calibration tests, and the measuring error of the sensor can be reduced by sensitivity correction.

为测量混凝土结构内的冲击波应力,研制了PVDF压力传感器;介绍了传感器的原理和设计思想,通过传感器的标定试验,得出传感器与混凝土介质匹配性能稳定,通过修正传感器灵敏度或采用将传感器打入包体标定的方法可减小应力测量误差;最后介绍了传感器在混凝土结构内药包爆炸应力波测试中的应用。

testing method for visual assessment and grading of barre

横档疵点的视觉评定试验法

Qualification Test of Welding Craft for SA213-Super304H and HR3C Steel

SA213-Super304H、HR3C钢焊接工艺评定试验

abrasion resistance assessment by jet test

喷射试验法评定耐磨性

Evaluation About Uncertainty of the Measurement During Brinell Hardness Test

布氏硬度试验中测量不确定度的评定

Evaluation of the Measurement Uncertainty in Brinell Hardness Test

布氏硬度试验中测量的不确定度评定

The Measurement Uncertainty Estimation of Environmental Chamber Temperature Performance

环境试验箱温度性能不确定度的评定

Sensory Evaluation The ultimate test for oxidized flavor in foods is a sensory one.

对食品中氧化气味的试验是感官评定。

Rice--Determination of cooking test quality

GB/T15682-1995稻米蒸煮试验品质评定

Loading test design and evaluation for a reinforced concrete arch bridge

钢筋混凝土拱桥荷载试验设计与评定

Application of Pressure Testing During Pressure Vessel Safety Assessment

压力容器安全评定中压力试验的应用

Discussion on Classification and Assessment of the Steel Plate Specimens after Tensile or Cold Bending Test

钢板拉伸与冷弯试验后试样分类及评定的探讨

testing method for the detection and assessment of photochromism

纺织品色牢度试验：光致变色的检验和评定

Scale inhibition mechanism was studied, static experiment was made in the laboratory, and scale inhibition effect was evaluated.

在实验室进行了表态试验，评定了阻垢效果。

Study on Evaluation Method for Uncertainty in Proficiency Testing Results of Impact Test

冲击试验能力验证结果不确定度评估方法探讨

An Evaluation Method of Reliability Acceptance Test of Range Communications System

靶场通信系统可靠性验收试验评定方法

Evaluation of Measuring Uncertainty in Metallic Material Brinell Hardness Test

金属材料布氏硬度试验中测量不确定度的评定

Evaluation of uncertainty in measurement of metallic materials-Charpy notch impact test;

金属夏比冲击试验测量结果不确定度评定

Uncertainty Evaluation of Tensile Test Result for S355J2+N Steel Plate

S355J2+N钢板拉伸试验测量结果的不确定度评定