electricity dregs heavy furnace

用法例句

The electricity dregs heavy furnace monitor and automatically pullsout the spindle control system design and research;

电渣重熔炉监测及自动抽锭控制系统的设计与研究

The brief introduction to the electricity dregs heavy furnace principle was presented,the selection of new motor choice(mainly is the fast motor,automatic fluctuation motor,revolving motor),PLC(programmable controller) shaping and inverter shaping were corried out.

简要介绍了电渣重熔炉原理。

To develop large-scale electro-slag remelting furnace process by mathematical statistics

用数理统计方法制定大型电渣炉重熔工艺

Analysis and control of hydrogen in electroslag refining process;

电渣重熔过程中氢行为的分析及控制

A lot of tests and analyses show H13 steel made by the craftwork of EAF_LF,VD refining_steel ingot_electroslag refining_forging boasts fine quality.

介绍了莱钢研究开发高品质H13热作模具钢的过程,采用电炉→LF、VD精炼→钢锭→电渣重熔→锻造工艺生产的H13钢在做了大量检验分析后,质量性能优良。

Method of controlling solidification quality in electroslag remelting process;

电渣重熔过程中金属凝固的控制方法

An Analysis on Formation of ANF-6 Electroslag Fluxes Skin of Electroslag Remelting Ingot;

电渣重熔锭ANF-6熔渣渣皮形成的分析

Effect of Modulating Remelting Power on Pool Depth of Electroslag Remelting;

调整功率对电渣重熔(ESR)熔池深度的影响

Entirely Sealed-in Argon Atmosphere Electro-Slag Remelting Superalloy GH4169;

全封闭Ar气保护电渣重熔GH4169合金

A high precision time-various model is obtained by system identification of electro-slag remelting process.

采用递推的带遗忘因子的最小二乘方法,以现场测得的熔炼电流为输入,实际熔化率为模型输出,对电渣重熔过程进行辨识,得到了精度较高的系统时变模型,并证明了模型的可靠性。

In this article,mechanism of burn-up content of titanium during electro-slag remelting in steel 2Cr18Ni11Ti and factors which influence burn-up content of titanium were analyzed.

本文分析了电渣重熔2Cr18Ni11Ti过程中[Ti]的烧损机理与影响[Ti]烧损的因素,提出了根据自耗电极[Ti]含量灵活制定相应的电渣重熔工艺。

Effect of Electromagnetic Stirring on Temperature Field of ESR Ingot;

电磁搅拌对电渣重熔钢锭温度场的影响

Study on Controlling Contents of Ti in GH901 Alloy Produced by ESR Process;

GH901合金采用电渣重熔工艺时Ti含量的控制研究

Analysis on Control of Ai and Ti Content in ESR Ingot of GH3030;

GH3030合金电渣重熔Al、Ti成分控制分析

Test methods for electro-slag remelting furnaces

GB/T1020-1989电渣重熔炉的试验方法

Improvement of Consarc ESR Furnace Control System

康萨克电渣重熔炉自动控制系统改造

A Computer Control System Designed for ESR Furnace

电渣重熔炉计算机控制系统设计与实现

To develop large-scale electro-slag remelting furnace process by mathematical statistics

用数理统计方法制定大型电渣炉重熔工艺

MATHEMATICAL MODELLING OF SLAG FLOW FIELD IN ESR SYSTEM

电渣重熔体系内熔渣流场的数学模拟

Adopting High Resistance Slag for Remelting W6Mo5Cr4V2 Steel

采用高电阻渣重熔W6Mo5Cr4V2钢

STUDY ON USE OF HIGH RESISTANCE SLAG IN ESR PROCESS FOR PRODUCING HIGH SPEED STEEL

采用高电阻渣电渣重熔高速钢的研究

Response of Slag Temperature to Power Input in ESR System

电渣重熔系统渣温对输入功率的响应

clinker/5klINkE(r);`klINkL/n rough stony material left in a furnace,etc after coal has burnt

（熔炉等内的）熔渣,渣块,煤渣.

Application of Electro Slag Welding with Consumable Nozzle in the Vertical Welding of Blast Furnace Shell in Laigang

熔嘴电渣焊在莱钢高炉炉壳立缝焊接中的应用

Cementitious performance of converter steel slag reconstructed with electric furnace slag

以电炉还原渣重构转炉钢渣的胶凝性能

The ESR process consists of three stages: 1) Formation of dropets on the electrode tip;

电渣重熔有三个阶段:1.电极端头熔滴形成期;

Dynamic Simulation on Electro-Capillary Oscillation in ESR System

电渣重熔体系电毛细振荡的动态模拟

Study on the slag constitution about the tin concentrate containing high W and AI reduced-smelting by EF

高钨高铝型锡精矿电炉还原熔炼渣型的研究

ANALYSIS OF SLAG BATH FLOW AND DEVELOPMENTOT MATHEMATICAL MODEL IN ESR SYSTEM

电渣重熔体系渣池运动分析及数学模型发展

Mathematical Model of Heat Generation Distribution in ESR Bath

电渣重熔系统渣池发热分布的数学模型

Calculation of Radiative Heat-Transfer above Free Slag Surface in ESR Process

电渣重熔过程渣面以上辐射传热的理论计算

Problems on Design of CaF_2-Free Slag Systems for Electroslag Remelting

电渣重熔用无氟渣系设计中的一些问题