burn setting

用法例句

This method could also be used to calculate other parameters concerned to the standard deviation of bag weight,such as the set value of filling ablity of packager,sum weight of 20.

该方法可以进一步计算与包装机准确度有关的其它参数,如包装机灌装设定值、20袋总重等。

When the unit load was changing in a large scale or working abnormally,the main steam signal changed rapidly,while the pressure triggered switch\'s set value is easily changed by vibrations or high temperatures,this led to PCV valve\'s wrong operation or no reaction.

当机组大范围变负荷或异常工况时,主蒸汽压力信号往往变化很大,但压力开关的设定值很容易因为周围振动和高温环境而迁移,从而导致PCV阀误动作或拒动。

Research on contributing factors which affect the set point of coagulant dosage autocontrol system of fluctuation of transmitted light detecting;

透光率脉动混凝投药自控系统设定值影响因素研究

Two kinds of main factors affecting the set point of a streaming current detector are analyzed in this paper.

系统地分析了常规条件下流动电流混凝投药自控系统设定值的两类主要影响因素 :一类是对流动电流检测值直接产生影响的因素 ,如源水水质、混凝剂条件 ,以及取样系统位置和结构上的变化 ;另一类是对混凝沉淀过程发生影响 ,从而导致流动电流设定值有所改变的因素 。

maximum allowable relief valve setting

安全阀最大许用设定值

"To restore all BIOS settings to the default values, press and select Yes."

试着将已更改过的设定值回复到预设值(按下回复预设值)。

To set these values, click Custom Settings

单击“自定义设置”按钮设定这些值

Formats the selected callouts or sets callout defaults

设置选定标注格式或设定标注默认值

Exception '{0}' cannot be thrown by static initializer or static field initializer

静态初始值设定项或静态字段初始值设定项无法引发异常“{0}”

That routine is initialized by the device driver associated with the device.

那个程序被与设备有关的设备驱动设定初值。

Expected value of type '{0}', found array initializer

应为“{0}”类型的值，但找到数组初始值设定项

Sets/returns value determining whether the status bar is visible.

设置/返回确定状态栏是否可见的值。

"Continue. The % Complete value for this task will be set."

"继续，设定此任务的完成百分比值。"

Interface field '{0}' must contain an initializer

接口字段“{0}”必须包含初始值设定项

Unable to set the image palette to the specified value.

无法将图像调色板设置为指定值。

Incorrectly structured array initializer

不正确的结构化数组初始值设定项

Customize the Access environment by setting defaults

通过设置默认值自定义 Access 环境

compiler limit : initializers nested too deeply

编译器限制:初始值设定项嵌套太深

Specifies the key that contains the named value to be set.

指定包含要设置的指名的值的项。

Base/member initializer destructor list

基/成员初始值设定项析构函数列表

00 oil mist detector zero setting checked.

21点零分检验油雾探测器零值设定。

Design and Development of Setting Management System of Protective Relaying;

继电保护定值管理系统的设计与开发