Wheel rim,Tire

用法例句

Quality control of bead wire production enterprise

胎圈钢丝生产企业中的质量控制

Influence of the range of elastic modulus on the determined elongation at rupture and yield strength ratio of bead wire

弹性模量设定对胎圈钢丝破断伸长率和屈强比测试结果的影响

Die repairing quality improvement of drawing die for bead wire

胎圈钢丝拉拔模具的修模质量改进

This paper applies ANSYS in computing the car wheels strength, simulates the dynamic cornering fatigue test and counts the fatigue life.

运用ANSYS软件对柳州钢圈厂某型号轿车钢圈进行有限元分析,模仿其动态弯曲疲劳测试试验并计算其疲劳寿命。

cycle tyre bead ring flipper

力车轮胎钢丝圈包布

bead diameter at rim seat of cycle tyre

力车轮胎胎圈着合直径

Unseat by water pressure testing method for cycle tyres

GB/T9763-1997力车轮胎脱圈水压试验方法

Development of HTΦ0.96mm tempered bead wire

HTΦ0.96mm回火胎圈钢丝的开发

Bead unseating resistance test for tubeless passenger car tyres

GB/T4504-1998轿车无内胎轮胎脱圈阻力试验方法

Influence of finished product procedure process on tempered bead wire adhesion force

成品工序工艺对回火胎圈钢丝黏合力的影响

Force analysis of steel cord in 435/50R19.5 TBR tire

435/50R19.5全钢载重子午线轮胎钢丝帘线受力分析

all-steel radial truck tyre

全钢子午线载重车轮胎

Reason Analysis of Laying Fracture of Wire Rod C82DA for Steel Curtain

胎圈钢丝用盘条C82DA吐断问题原因分析

Development of diameter 1.55mm HT tempered bead wire

Φ1.55mm HT回火胎圈钢丝的研制

Optimized analysis on chafer width of TBR tire

全钢载重子午线轮胎胎圈包布宽度优化分析

Bead fit test method for tube aircraft tyre

GB/T11195-1998航空有内胎轮胎胎圈密合压力试验方法

Something whose form is reminiscent of a ring-shaped cake.

汽车轮胎形如甜甜圈的环状物

Steel cord for radial tyre

GB/T11181-1989子午线轮胎用钢丝帘线

Research on the Drawing Technology of Tyre Bead Wires and Aperture Design of the Drawing Die

胎圈钢丝拉拔工艺和模具孔型设计研究

Mainly used during the formation lap to allow the driver to spin the rear wheels and generate heat in the tyres.

主要被用在暖胎圈，让车手可以打滑后轮，进而提高轮胎的温度。

Application of 3+9×0.22+0.15 steel cord in tubeless TBR tire

3+9×0.22+0.15钢丝帘线在无内胎全钢载重子午线轮胎中的应用

Application of 3+9+15×0.245HT steel cord in carcass ply of OTR radial tire

3+9+15×0.245HT钢丝帘线在全钢工程机械子午线轮胎胎体中的应用